Toshiba GR200 Series - 4.5.2 Preparation for operation

6F2S1914 (0.49)
GRL200 (Soft 033 & 037)
- 786 -
4.5.2 Preparation for operation
The TOTALTIM function is enabled when the user sets [TTIM*-EN] On.
Table 4.5-3 TOTALTIM operation
Scheme switch
Set
Comment
TTIM01-EN
On / Off
Operation enable for operating signal #1
TTIM02-EN
On / Off
Operation enable for operating signal #2
(omitted)
(omitted)
(omitted)
TTIM12-EN
On / Off
Operation enable for operating signal #12