Toshiba GR200 Series - (ix) Setting names

6F2S1914 (0.49)
GRL200 (Soft 033 & 037)
- 859 -
Signal Number
Signal Name
Description
….
….
….
512001 8203481F60
DPOS72_F_BI_ERR
BI connection error detected(DPOS72)
Table 4.8-9 PLC Monitoring points (On/Off output-signal for BIO)
Signal Number
Signal Name
Description
512001 8A03011DC4
DPOS01_FSL_BO_FLG
DPOS01 select (Off) command for Binary Output.
512001 8A03021DC4
DPOS02_FSL_BO_FLG
DPOS02 select (Off) command for Binary Output.
512001 8A03031DC4
DPOS03_FSL_BO_FLG
DPOS03 select (Off) command for Binary Output.
….
….
….
512001 8A03481DC4
DPOS72_FSL_BO_FLG
DPOS72 select (Off) command for Binary Output.
512001 8603011DC6
DPOS01_OSL_BO_FLG
DPOS01 select (ON) command for Binary Output.
512001 8603021DC6
DPOS02_OSL_BO_FLG
DPOS02 select (ON) command for Binary Output.
512001 8603031DC6
DPOS03_OSL_BO_FLG
DPOS03 select (ON) command for Binary Output.
….
….
…..
512001 8603481DC6
DPOS72_OSL_BO_FLG
DPOS72 select (On) command for Binary Output.
(ix) Setting names
Note: The “xx” within “DPOSxx” represents the DPOS function number. (e.g., if DPOS03
is considered, the “xx” is equal to “03”. The numbers used for “xx” can be
represented from “01” to “72”.)
Table 4.8-10 Settings for select logics
Setting Name
Description
Default
Setting item or value
DPOSxx-CTREN
Activate control function of DPOSxx
On
Off / On
DPOSxx-LGSLFFCT
Logic selector for select condition in DPOSxx
Fixedlogic
Fixedlogic / PLC
DPOSxx-CTRAHMI
Activate local panel control in DPOSxx
SBO
DIR/ SBO