Toshiba GR200 Series - (i) Signal names and numbers; (ii) Setting name

6F2S1914 (0.49)
GRL200 (Soft 033 & 037)
- 886 -
The user can clear the intervals (OT1 to OT4) by key-operation of the “Operation time”
sub-menu Figure 4.8-39 or operation from the remote-end. See chapter User interface:
Monitoring sub-menu .
DPOS1-OT1
10:48 1/5
DPOS_SYN-Dev1-OT1
******.*** ms
DPOS_SYN-Dev1-OT2
******.*** ms
DPOS_SYN-Dev1-OT3
Operation Time
10:48 1/26
DPSY1-OT >
DPSY2-OT >
_DPOS1-OT >
DPOS2-OT >
DPOS3-OT >
DPOS4-OT >
ENTER
CANCEL
Figure 4.8-39 Operation time sub-menu
(i) Signal names and numbers
Table 4.8-27 Mapping points
Signal Number
Signal Name
Description
512001 7003006D0D
DEV01_RESET_REQ
DPOS01 operation time reset command received (Mapping Data)
512001 7003016D0D
DEV02_RESET_REQ
DPOS02 operation time reset command received (Mapping Data)
512001 7003026D0D
DEV03_RESET_REQ
DPOS03 operation time reset command received (Mapping Data)
512001 7003486D0D
DEV48_RESET_REQ
DPOS72 operation time reset command received (Mapping Data)
(ii) Setting name
Table 4.8-28 Setting of operation time function in DPOSxx
Setting Name
Description
Default
Setting item or value
DPOSxx-OPETMEN
Activation of the operation time measurement in DPOSxx
On
Off / On