- 956 -
Operate command (P3) for Binary Output in TPOS24
TPOS01 P1 direction execute command
TPOS02 P1 direction execute command
TPOS03 P1 direction execute command
TPOS24 P1 direction execute command
TPOS01 P2 direction execute command
TPOS02 P2 direction execute command
TPOS03 P2 direction execute command
TPOS24 P2 direction execute command
TPOS01 P3 direction execute command
TPOS02 P3 direction execute command
TPOS03 P3 direction execute command
TPOS24 P3 direction execute command
TPOS01 P1 direction execute command
TPOS02 P1 direction execute command
TPOS03 P1 direction execute command
TPOS24 P1 direction execute command
TPOS01 P2 direction execute command
TPOS02 P2 direction execute command
TPOS03 P2 direction execute command
TPOS24 P2 direction execute command
TPOS01 P3 direction execute command
TPOS02 P3 direction execute command
TPOS03 P3 direction execute command
TPOS24 P3 direction execute command
(xii) Setting names
Note: The “xx” of “TPOSxx” represents the TPOS function number. (e.g., if the TPOS03
is considered, the “xx” is equal to “03”. The suffix “xx” can be represented from
“01” to “24”.)
Table 4.9-21 Setting of Operate in TPOSxx
Method of command output(TPOS01–24)
Duration of command output(TPOS01–24)