Toshiba H7 - Page 181

174 H7 ASD Operation Manual
#5 Scan Transmit
Program ⇒ Communication Setting Parameters ⇒ Scan Transmit
Settings
Contact Toshiba’s Marketing Department for information on this parameter.
Direct Access Number — F845
Parameter Type — Selection List
Factory Default — Scan 0
Changeable During Run — Yes
#6 Scan Transmit
Program ⇒ Communication Setting Parameters ⇒ Scan Transmit
Settings
Contact Toshiba’s Marketing Department for information on this parameter.
Direct Access Number — F846
Parameter Type — Selection List
Factory Default — Scan 0
Changeable During Run — Yes
S20 Error Mode
Program ⇒ Communication Setting Parameters ⇒ S20 Settings
The S20 system is Toshiba’s high-speed fiber optic communication system.
This function is unavailable at the time of this release.
Direct Access Number — F850
Parameter Type — Selection List
Factory Default — Mode 0
Error Detect Time
Program ⇒ Communication Setting Parameters ⇒ S20 Settings
The S20 system is Toshiba’s high-speed fiber optic communication system.
This function is unavailable at the time of this release.
Direct Access Number — F851
Parameter Type — Numerical
Factory Default — 200
Receive Address
Program ⇒ Communication Setting Parameters ⇒ S20 Settings
The S20 system is Toshiba’s high-speed fiber optic communication system.
This function is unavailable at the time of this release.
Direct Access Number — F860
Parameter Type — Selection List
Factory Default — 0
Transmit Address
Program ⇒ Communication Setting Parameters ⇒ S20 Settings
The S20 system is Toshiba’s high-speed fiber optic communication system.
This function is unavailable at the time of this release.
Direct Access Number — F861
Parameter Type — Selection List
Factory Default — 0
Speed Reference Station
Program ⇒ Communication Setting Parameters ⇒ S20 Settings
The S20 system is Toshiba’s high-speed fiber optic communication system.
This function is unavailable at the time of this release.
Direct Access Number — F862
Parameter Type — Selection List
Factory Default — 0
Speed Reference Address
Program ⇒ Communication Setting Parameters ⇒ S20 Settings
The S20 system is Toshiba’s high-speed fiber optic communication system.
This function is unavailable at the time of this release.
Direct Access Number — F863
Parameter Type — Selection List
Factory Default — 0
Torque Reference Station
Program ⇒ Communication Setting Parameters ⇒ S20 Settings
The S20 system is Toshiba’s high-speed fiber optic communication system.
This function is unavailable at the time of this release.
Direct Access Number — F865
Parameter Type — Selection List
Factory Default — 0
F845 F865
www . ElectricalPartManuals . com