Toshiba H7 - Page 182

H7 ASD Operation Manual 175
Torque Reference Address
Program ⇒ Communication Setting Parameters ⇒ S20 Settings
The S20 system is Toshiba’s high-speed fiber optic communication system.
This function is unavailable at the time of this release.
Direct Access Number — F866
Parameter Type — Selection List
Factory Default — 0
Fault Detect Station Number
Program ⇒ Communication Setting Parameters ⇒ S20 Settings
The S20 system is Toshiba’s high-speed fiber optic communication system.
This function is unavailable at the time of this release.
Direct Access Number — F868
Parameter Type — Selection List
Factory Default — 0
Station Mode
Program ⇒ Communication Setting Parameters ⇒ S20 Settings
The S20 system is Toshiba’s high-speed fiber optic communication system.
This function is unavailable at the time of this release.
Direct Access Number — F869
Parameter Type — Selection List
Factory Default — Station Mode 0
Optional Parameter #1
Program ⇒ Communication Setting Parameters ⇒ Optional
Parameters
Contact Toshiba’s Marketing Department for information on this parameter.
Direct Access Number — F890
Parameter Type — Numerical
Factory Default — 0
Minimum — 0
Maximum — 0
Optional Parameter #2
Program ⇒ Communication Setting Parameters ⇒ Optional
Parameters
Contact Toshiba’s Marketing Department for information on this parameter.
Direct Access Number — F891
Parameter Type — Numerical
Factory Default — 0
Minimum — 0
Maximum — 0
Optional Parameter #3
Program ⇒ Communication Setting Parameters ⇒ Optional
Parameters
Contact Toshiba’s Marketing Department for information on this parameter.
Direct Access Number — F892
Parameter Type — Numerical
Factory Default — 0
Minimum — 0
Maximum — 0
Optional Parameter #4
Program ⇒ Communication Setting Parameters ⇒ Optional
Parameters
Contact Toshiba’s Marketing Department for information on this parameter.
Direct Access Number — F893
Parameter Type — Numerical
Factory Default — 0
Minimum — 0
Maximum — 0
F866 F893
www . ElectricalPartManuals . com