176 H9 ASD Installation and Operation Manual
Pattern Group 2 Selection 5
Program Pattern Run Speeds
This parameter allows the user to select 1 of 15 configured Preset Speeds as
the number 5 selection to be included in the Group 2 Selection.
Skip may be selected to ignore this Selection.
Setting
0 — Skip
1 – 15 Preset Speed Number
See F523 for more information on this parameter.
Direct Access Number — F536
Parameter Type — Selection List
Factory Default — Skip
Changeable During Run — No
Pattern Group 2 Selection 6
Program Pattern Run Speeds
This parameter allows the user to select 1 of 15 configured Preset Speeds as
the number 6 selection to be included in the Group 2 Selection.
Skip may be selected to ignore this Selection.
Setting
0 — Skip
1 – 15 Preset Speed Number
See F523 for more information on this parameter.
Direct Access Number — F537
Parameter Type — Selection List
Factory Default — Skip
Changeable During Run — No
Pattern Group 2 Selection 7
Program Pattern Run Speeds
This parameter allows the user to select 1 of 15 configured Preset Speeds as
the number 7 selection to be included in the Group 2 Selection.
Skip may be selected to ignore this Selection.
Setting
0 — Skip
1 – 15 Preset Speed Number
See F523 for more information on this parameter.
Direct Access Number — F538
Parameter Type — Selection List
Factory Default — Skip
Changeable During Run — No
Pattern Group 2 Selection 8
Program Pattern Run Speeds
This parameter allows the user to select 1 of 15 configured Preset Speeds as
the number 8 selection to be included in the Group 2 Selection.
Skip may be selected to ignore this Selection.
Setting
0 — Skip
1 – 15 Preset Speed Number
See F523 for more information on this parameter.
Direct Access Number — F539
Parameter Type — Selection List
Factory Default — Skip
Changeable During Run — No
F536 F539
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
To Next Page
Loading...
