Toshiba HFCR407C - Page 16

16
4
Parts specifications
Indoor units
High wall: MM-K080, MM-KR080
No. PARTS NAME TYPE SPECIFICATIONS
1 Fan motor MMF-230-27-4R Output (rated) 27 W, 4 pole, 230 V, 1 phase, 50 Hz
2 Running capacitor – Fan motor EEP2W205HQA107 AC 400 V, 2 μF
3 Pulse motor valve EDM-B40YPTR-7B-A Capacity: 40
High wall: MM-K056, MM-KR056
No. PARTS NAME TYPE SPECIFICATIONS
1 Fan motor MMF-230-27-4P Output (rated) 27, 4 pole, 230 V, 1 phase, 50 Hz
2 Running capacitor – Fan motor EEP2H155HQA107 AC 400 V, 1,5 μF
3 Pulse motor valve EDM-B40YTR-7B-A Capacity: 40
High wall: MM-K042, MM-KR0042
No. PARTS NAME TYPE SPECIFICATIONS
1 Fan motor MMF-230-27-4P Output (rated) 27 W, 4 pole, 230 V, 1 phase, 50 Hz
2 Running capacitor – Fan motor EEP2H105HQA105 AC 400 V, 1 μF
3 Pulse motor valve EDM-B25YPTF-7B-A Capacity: 25
High wall: MM-K080, MM-KR080
MM-K056, MM-KR056
MM-K042, MM-KR042
No. PARTS NAME TYPE SPECIFICATIONS
4 Transformer TT - 03 - 1 DC 16.3 V – 0.5 A / AC 11.6 V – 0.15 A
5 Pulse motor EDM-MD12TF-3 DC 12 V
6 Pressure sensor 150/100NH6-D Power voltage DC 12 V
7 Sensor for room temperature TA Maximum input: °C 25 50
38 mA at 25 °C kΩ 10 3.45
8 Sensor for heat exchanger Tc1 Maximum input: °C -12 0 25 50
34 mA at 25 °C kΩ 62.3 32.8 10 3.6
9 Sensor for heat exchanger Tc2 Maximum input: °C 0 25 50
26 mA at 25 °C kΩ 34.6 10 3.4
10 Control PCB CM**C03 AC 220 – 240 V
11 Power PCB P**RC01 AC 220 – 240 V