75
13
Control circuit configuration
Indoor units
(6) Service PC board selection corresponded table MCC-1361-01
The indoor control PC board can correspond to multiple models. When replacing MCC-1361-01 PC board assembly, set DIP
switch, rotary switch, and jumper according to the following description.
PCB label Model
CMC01 MM-U140 MM-U112, MM-U080, MM-U056, MM-TU056, MM-TU042, MM-TU028
CMC02 MM-B140, MM-B112, MM-B080, MM-B056, MM-SB028, MM-N080, MM-N056, MM-N042, MM-N028,
MM-S080, MM-S056, MM-SR080, MM-SR056
CMC03 MM-C/CR140, MM-C/CR112, MM-C/CR080, MM-C/CR056, MM-C/CR042
MM-K/KR140, MM-K/KR112, MM-K/KR080, MM-K/KR056, MM-K/KR042
NOTE: denotes year of manufacture
Switch set-up
1 SW01 Indoor unit No. : Match to No. which the rotary switch is set-up
: Master unit ... 1
: Slave units ... 2 to 16
2 SW02 Network address : Match to set-up contents of PC board before replacement.
3 SW03 : Match to set-up contents of PC board before replacement.
4 SW06 : Match to set-up contents of PC board before replacement.
(In some models, it is not available)
5 SW07 Central control switching : Match to set-up contents of PC board before replacement.
6 SW08 HP set-up : Match to set-up contents of PC board before replacement.
Jumper set-up
Match to the set-up contents of PC board before replacement.
In some models, the following selections are provided. O: Provided X: None
J11 O Filter timer 120H
X Filter timer 2500H
MCC-1361-01
PCB label
To Next Page
Loading...
