– 23 –
Hydro Unit
Installation Manual
■Setting – Initial setting –
(1) Press the [ ] / [ ] button to select
“Setting” on the “MENU” screen, then press the [
] button.
(2) Press the [ ] / [ ] button to select “Initial
setting” on the Setting screen, then press the [ ]
button.
■Clock
• Setting for the clock (date, month, year, time)
(1) Press the [ ] / [ ] button to select “Clock”
on the Initial setting screen, then press the [ ]
button.
(2) Press the [ ] / [ ] button to select the date,
month, year, and, time.
(3) Press the [ ] / [ ] button to set the value,
then press the [ ] button.
• The clock display appears on the top screen.
• The clock display blinks if the clock setting has been
reset due to power failure or other cause.
■Header / Second
• For a dual remote controller system.
• Set one of remote controller as the header remote
controller.
• Set another remote controller as the second remote
controller.
(1) Press the [ ] / [ ] button to select
“Header / Second” on the “Initial setting” screen,
then press the [ ] button.
(2) Press the [ ] / [ ] button to select
“Header” / “Second”, then press the [ ] button.
• Some function are not available when the remote
controller is set as the Second remote controller.
• In the dual remote controller system, the latter
operation overrides the former.
• The factory default is Header remote controller.
Disable function with second remote controller
• “Schedule timer”
• “Silent mode”
• “Schedule setting”
Anti bacteria
MENU(2/2)
Frost protection
Setting
Information
SET
Power consumption
Initial setting
Setting
Schedule setting
SET
Clock
Initial setting(1/2)
Screen contrast
Backlight
Header / Second
SET
Temperature control
Clock
Initial setting(1/2)
Screen contrast
Backlight
Header / Second
SET
Temperature control
Header
Header / Second
Second
FIX
■Temperature control
• To control room temperature instead of water
temperature with this remote controller
(1) Press the [ ] / [ ] button to select
“Temperature control” on the “Initial setting” screen,
then press the [
] button.
(2) Press the [ ] / [ ] button to select
“ON/OFF”, then press the [ ] button.
• When the “Temperature control” is set to “ON”, the
system is controlled with the sensor of the remote
controller.
• The factory default is “OFF”.
■Language
• Select a language for the screen text.
(1) Press the [ ] / [ ] button to select
“Language” on the “Initial setting” screen, then
press the [
] button.
(2) Press the [ ] / [ ] button to select
the language, then press the [ ] button.
• The factory default is “English”.
Clock
Initial setting(1/2)
Screen contrast
Backlight
Header / Second
SET
Temperature control
ON
Temperature control
OFF
FIX
Language
Initial setting(2/2)
Summer time
SET
LangClock displayuage
Clock synchronisation
Language(1/4)
English
Turkish
French
German
Spanish
FIX
Türkçe
Français
Deutsch
Español
Language(2/4)
Italian
Dutch
Finnish
Czech
Hungarian
FIX
Nederlands
SUOMI
Čeština
Magyar
Italiano
Language(3/4)
Croatian
Slovenian
Portuguese
Polish
Danish
FIX
Slovenščina
Português
Polski
Dansk
Hrvatski
Language(4/4)
FIX
Swedish Svenska
45-EN 46-EN
To Next Page
Loading...