160
2. DN Setting
•
•
2-1. How to set hydro unit DN
<Procedure> Perform the following when no operation is in progress.
1 Press the [ ] button and the [
] button at same time for 4
seconds or longer on the top screen to display the “FIELD SETTING
MENU”.
2 Press the [
] / [
] button to select “Hydro Unit DN” on the
FIELD SETTING MENU screen, then press the [
] button.
3 Press the [
] / [
] button to select DN or Data, then press the
[
] / [
] button to set the value.
4 Press the [ ] button. The set value is registered.
Data
0070
0010
SET
To Next Page
Loading...