Toshiba HWT-601XWHT6W-E - Page 25

Hydro Unit
Installation Manual
– 24 –
■ Setting – Initial setting –
(1) Press the [ ] / [ ] button to select
“Setting” on the “MENU” screen, then press the
[ ] button
MENU(2/2)
Anti bacteria
Frost protection
Information
Power consumption
Setting
SET
(2) Press the[ ] / [ ] button to select “Initial
setting” on the “Setting” screen, then press the
[ ] button.
Setting
Initial setting
Schedule setting
SET
■ Clock
• Settingfortheclock(date,month,year,time)
(1) Press the [ ] / [ ] button to select “Clock”
on the “Initial setting” screen, then press the [ ]
button.
Initial setting(1/2)
Clock
Screen contrast
Header / Second
Temperature control
Backlight
SET
(2) Press the [ ] / [ ] button to select the date,
month, year, and, time.
(3) Press the [ ] / [ ] button to set the value,
then press the [ ] button.
Clock
31 / 12 / 2021 01:11
FIX
• Theclockdisplayappearsonthetopscreen.
• Theclockdisplayblinksiftheclocksettinghasbeen
reset due to power failure or other cause.
■ Header / Second
• Foradualremotecontrollersystem.
• Setoneofremotecontrollerastheheaderremote
controller.
• Setanotherremotecontrollerasthesecondremote
controller.
(1) Press the [ ] / [ ] button to select
“Header / Second” on the “Initial setting” screen,
then press the [ ] button.
Initial setting(1/2)
Clock
Screen contrast
Header / Second
Temperature control
Backlight
SET
(2) Press the [ ] / [ ] button to select
“Header” / “Second”, then press the [ ] button.
Header / Second
Header
Second
FIX
• Somefunctionarenotavailablewhentheremote
controller is set as the Second remote controller.
• Inthedualremotecontrollersystem,thelatter
operation overrides the former.
• ThefactorydefaultisHeaderremotecontroller.
Disable function with second remote controller
• “Schedule timer”
• “Silent mode”
• “Schedule setting”
■ Temperature control
• Tocontrolroomtemperatureinsteadofwater
temperature with this remote controller
(1) Press the [ ] / [ ] button to select
“Temperature control” on the “Initial setting” screen,
then press the [ ] button.
Initial setting(1/2)
Clock
Screen contrast
Header / Second
Temperature control
Backlight
SET
(2) Press the [ ] / [ ] button to select
“ON/OFF”, then press the [ ] button.
Temperature control
ON
OFF
FIX
• Whenthe“Temperaturecontrol”issetto“ON”,the
system is controlled with the sensor of the remote
controller.
• Thefactorydefaultis“OFF”.
• ItisalsonecessarytosettheDN“40”ofhydrounit
to “1”.
■ Language
• Selectalanguageforthescreentext.
(1) Press the [ ] / [ ] button to select
“Language” on the “Initial setting” screen, then
press the [ ] button.
Initial setting(2/2)
Language
Summer time
Clock synchronisation
Clock display
SET
(2) Press the [ ] / [ ] button to select
the language, then press the [ ] button.
Language(1/4)
FIX
English
Turkish
French
German
Spanish
Türkçe
Français
Deutsch
Español
Language(2/4)
FIX
Italian
Dutch
Finnish
Czech
Hungarian
Italiano
Nederlands
SUOMI
Čeština
Magyar
Language(3/4)
FIX
Croatian
Slovenian
Portuguese
Polish
Danish
Hrvatski
Slovenščina
Português
Polski
Dansk
Language(4/4)
FIX
Swedish Svenska
• Thefactorydefaultis“English”.
47-EN
48-EN