157
4 Press the [ ] button.
5 Press the [ ] button to Fix.
Mode : Operation mode (HEAT, COOL, HW (Hot water))
Z1 : ZONE1 setting temperature
Z2 : ZONE2 setting temperature
HW : Hot water supply operation setting temperature
Start : Operation start time (0:00 ~ 23:59)
End : Operation end time (0:00 ~ 24:00, -- : --)
• “-- : --” means the operation continues.
If End time is set earlier than Start time, an error is displayed.
Schedule timer confirm?
Condition setting
NOYES
To Next Page
Loading...
