158
To set up ranging over a day
There are two methods.
1.If “24:00” is set to “END” and “00:00” is set to “START” next day, the previous operation status will be continued.
And set the time you want to stop to “END”.
2.If “--” is set to “END”, the previous operation status will be continued next day. And set the time you want to stop
to “END”. Any “START” time is sufficient if it is earlier than “END” time.
In the case of heating operation from 21:00 of Monday night to 3:00 of Tuesday morning.
*1: “START” time is permissible 00:00 ~ 02:59 in this example.
Example of set up (1)
Example of set up (2)
Example of set up (3) (ALL DAY)
Example of set up (4) (ALL DAY)
55 45 -- 21:00 24:00
-- -- -- -- -- : -- -- : --
-- -- -- -- -- : -- -- : --
Condition setting(1/2)
COPY RESET
HEAT
ALL
TUE WED THU FRI SAT SUN
Mode Start EndZ1 Z2 HW
MON
DAY SET
55 45 -- 00:00 03:00
-- -- -- -- -- : -- -- : --
-- -- -- -- -- : -- -- : --
Condition setting(1/2)
HEAT
ALL
TUE WED THU FRI SAT SUN
Mode Start EndZ1 Z2 HW
MON
COPY RESET
DAY SET
12 13 14 15 16 17 18 19 20 21 22 23 2 3 4 5 6 7 8 9 10 11 1201
55 45 -- 21:00 -- : --
-- -- -- -- -- : -- -- : --
-- -- -- -- -- : -- -- : --
Condition setting(1/2)
COPY
RESET
HEAT
ALL
TUE WED THU FRI SAT SUN
Mode Start EndZ1 Z2 HW
MON
DAY SET
55 45 -- 02:30 03:00
-- -- -- -- -- : -- -- : --
-- -- -- -- -- : -- -- : --
Condition setting(1/2)
HEAT
ALL
TUE WED THU FRI SAT SUN
Mode Start EndZ1 Z2 HW
MON
COPY
RESET
DAY SET
*1
12 13 14 15 16 17 18 19 20 21 22 23 2 3 4 5 6 7 8 9 10 11 1201
55 45 - - 21:00 24:00
55 45 -- 00:00 03:00
-- -- -- -- -- : -- -- : --
Condition setting(1/2)
RESET
HEAT
ALL
TUE WED THU FRI SAT SUN
Mode Start EndZ1 Z2 HW
MON
DAY SET
HEAT
12 13 14 15 16 17 18 19 20 21 22 23 2 3 4 5 6 7 8 9 10 11 1201
55 45 -- 21:00 - - : --
55 45 -- 02:30 03:00
-- -- -- -- -- : -- -- : --
Condition setting(1/2)
RESET
HEAT
ALL
TUE WED THU FRI SAT SUN
Mode Start EndZ1 Z2 HW
MON
DAY SET
HEAT
*1
12 13 14 15 16 17 18 19 20 21 22 23 2 3 4 5 6 7 8 9 10 11 1201
To Next Page
Loading...
