174
17. Reset power consumption data
• This function is available only for the header remote controller.
1 Press the [ ] button and the [ ] button at same time for 4
seconds or longer on the top screen to display the “FIELD SETTING
MENU”.
2 Press the [ ] / [ ] button to select “Reset power
consumption data” on the FIELD SETTING MENU, then press the
[ ] button.
3 Press the [ ] button, then power consumption data is cleared.
Service monitor
FIELD SETTING MENU(2/2)
Hydro Unit DN
Remote controller DN
Reset power consumption data
Sensor information
SET
Reset power consumption data
NOYES
Do you want to reset data?
To Next Page
Loading...
