175
18. Sensor information
• Shows the value of sensor.
1 Press the [ ] button and the [ ] button at same time for 4
seconds or longer on the top screen to display the “FIELD SETTING
MENU”.
2 Press the [ ] / [ ] button to select “Sensor information” on
the FIELD SETTING MENU, then press the [ ] button.
3 Select display number.
• Display 1 is Hydro Unit sensor
• Display 2 is Outdoor Unit sensor
Service monitor
FIELD SETTING MENU(2/2)
Hydro Unit DN
Remote controller DN
Reset power consumption data
Sensor information
SET
Sensor information(1/2)
NOYES
TC 30°C
TWI 30°C
TWO 35°C
THO 35°C
WF 23.0 L/min
LPS 1.2MPa
TTW 45°C
TFI 30°C
RT 20°C
MIX 10step
RETURN
NO
YES
Sensor information(2/2)
TO 16°C
TD 80°C
TE 12°C
TS 15°C
CT 15.0A
CMP 90Hz
FAN1 600rpm
FAN2 600rpm
PMV 250pls
HPS 4.0MPa
RETURN
To Next Page
Loading...
