215
No. Exchange parts name Work procedure Remarks
Main
1. Detachment
①
For 1 minute after the power is turned
off, do not disassemble the inverter to
prevent an electric shock.
WARNING
When removing the connectors, release the
safety lock of the housing.
NOTE
For 1 minute after the power is turned
off, do not disassemble the inverter to
prevent an electric shock.
WARNING
When removing the connectors, release the
safety lock of the housing.
NOTE
2. Attachment
Refer to the wiring diagram for connector
connections.
NOTE
Attachment (Sub board)
Refer to the wiring diagram for connector
connections.
NOTE
To Next Page
Loading...
