Toshiba IK-TU51CU - Freeze Operation; 7 Mode Setting by on Screen Display.; Using the Menus

6. 6 Freeze Operation
• Freeze Mode Operation is only possible when no menu character display or color bar is on the screen.
• Freeze Mode Operation is not possible when the shutter mode is set to EXT TRIG.
■ The method of toggling between Live Image Mode and Freeze Mode differs according to the shutter
menu’s FREEZE INPUT setting.
When set to FRONT : The mode is toggled using the FREEZE button on the front panel.
When set to TRIG _fl_: The mode is toggled at the rising edge of the trigger terminal input.
When set to TRIG \r : The mode is toggled at the falling edge of the trigger terminal input.
• When the OPTION menu’s FREEZE DISP setting is set to ON, “FREEZE” is indicated at the upper right
corner of the screen.
• During Freeze Mode Operation, the [DISP], [PAGE], [MENU UP], [MENU DOWN], [DATA UP], [DATA
DOWN] and [FILE] buttons are disabled.
7. MODE SETTING BY ON SCREEN DISPLAY
Various settings can be controlled on the unit by using the on screen menu displayed on the monitor. The
contents once set are memorized in the scene files (A, B, C) selected, so if the power turns off, it is
unnecessary to set again when using the unit next time. When the setting is performed, select the menu of
the item to be set.
7. 1 Using the Menues
When the power turns on, the normal screen showing only the video signal appears. Change the output to
each screen (video signal output, color bar screen, Index menu, menus, and area menu) by using the [DISP],
[PAGE], [MENU UP], and [MENU DOWN] buttons.
* A menu is selected when pushing the [PAGE] button after moving the on the screen by the [MENU
UP], [MENU DOWN] button while the Index menu is displayed.
17