Toshiba IK-TU51CU - Pulse

(3) 2PULSE
Accumulation of charges Is started and ended through the trigger pulse input to the DC IN/SYNC terminal or
trigger signal input (LVDS) to the DIGITAL terminal, the vertical sync signal is reset and field images are
Trigger pulse level : (Low Level): Less than 0.5V , (High Level): 3.4V to 5V
(DC IN/SYNC terminal)
Trigger pulse fetch timing : Rising edge / Falling edge / Pulse width selectable
■ W hen the trigger pulse fetch timing is set to pulse width
Trigger pulse width : More than 16.7ms(FLD/FRM setting: FLD)
More than 33.4ms(FLD/FRM setting :FRM)
Trigger pulse interval : More than 16.7ms(FLD/FRM setting: FLD)
More than 33.4ms(FLD/FRM setting: FRM)
■ W hen the trigger pulse fetch timing is set to rising edge or falling edge
Trigger pulse width : More than 2 u s
Trigger pulse interval : More than 16.7ms(FLD/FRM setting: FLD)
More than 33.4ms(FLD/FRM setting: FRM)
45