EM SERVER RACK MOUNT Installing the Outer Rails to the Rack
Installation Manual June, 2011 2-9
3. Secure the chassis with two screws as illustrated.
4. Repeat steps 1-3 for the other inner rail extension.
Figure 2-7 Inner Rack Extension
Installing the Outer Rails
to the Rack
1. Attach the short bracket to the outside of the long bracket. You must
align the pins with the slides. Also, both bracket ends must face the
same direction. Refer to Figure 2-8.
2. Adjust both the short and long brackets to the proper distance so that
the rail fits snugly into the rack.
3. Secure the long bracket to the front side of the outer rail with two M5
screws and the short bracket to the rear side of the outer rail with
three M5 screws.
4. Repeat steps 1-4 for the left outer rail.
To Next Page
Loading...
