BEZEL INSTALLATION EC Server Bezel
Installation Manual June, 2011 2-11
inserting). When the server has been pushed completely into the
rack, you should hear the locking tabs “click”. Refer to Figure 2-10
4. (Optional) Insert and tighten the thumbscrews that hold the front of
the server to the rack.
Figure 2-10 Server Chassis Install
BEZEL INSTALLATION The IPedge bezel is an option. Order a bezel kit for the server model on
which it will be installed.
• For the EC Server order part number I-EC-BZL-1A
• For the EM Server order part number I-EM-BZL-1A
EC Server Bezel The (P/N: I-EC-BZL-1A) bezel can be attached directly to the EC Server
chassis.
To Next Page
Loading...
