ROLES Create a New Role
5-2 Installation Manual June, 2011
ROLES There are two types of Enterprise Manager user roles;
• System Administrators
• Telephone Users
Each role is defined as a list of permission items (access rights) that
determine the user’s access level in Enterprise Manager.
The IPedge system has four technician roles and two telephone user
roles defined when shipped. These roles cannot be changed. New roles
can be added to create custom definitions.
Create a New Role New roles can be configured by adding a new Role and choosing the
specific items to include.
1. Select Administration > Roles. Click on the New role icon.
2. Select the type of role.
3. Enter the name of the new role and a brief description of the new role.
Check-mark the items to include in this role.
4. Click on the Save icon.
Copy a Role 1. Click on a role in the list.
2. Click on the Copy icon.
3. Enter a Name and brief description of the new role.
4. Select the items to include in this role.
5. Click on the Save icon.
USERS When a User is added to the Enterprise Manager that User is assigned a
role. The role defines the level of access that user has.
As each Station is assigned it is assigned, among other things, a DN and
a Telephone User role.
Administration User To add an administration user:
1. Login to Enterprise Manager.
2. Select Administration > Users a list of users will display.
3. Click on the New user icon.
4. Enter the following parameters. Unless otherwise noted the entries
are required.
Login Name - The screen name of the user.
First Name - The user’s first name
Middle Name - Optional, this field does not require an entry.
Last Name - The user’s last name
To Next Page
Loading...
