iv [CONFIDENTIAL] TECRA M5 Maintenance Manual (960-542)
The manual is divided into the following parts:
Chapter 1 Hardware Overview describes the TECRA M5 system unit and each
FRU.
Chapter 2 Troubleshooting Procedures explains how to diagnose and resolve
FRU problems.
Chapter 3 Test and Diagnostics describes how to perform test and diagnostic
operations for maintenance service.
Chapter 4 Replacement Procedures describes the removal and replacement of the
FRUs.
Appendices The appendices describe the following:
 Handling the LCD module
 Board layout
 Pin assignments
 Keyboard scan/character codes
 Key layout
 Wiring diagrams
 BIOS rewrite procedures
 EC/KBC rewrite procedures
 Reliability
To Next Page
Loading...
Need help?
General