Toshiba MD30H82 - Disassembly Instructions; Removal of Mechanical Parts and P.C. Boards

DISASSEMBLY INSTRUCTIONS
B1-1
1. REMOVAL OF MECHANICAL PARTS
AND P.C. BOARDS
1-1: BACK CABINET (Refer to Fig. 1-1)
1.
2.
Remove the 8 screws 1.
Remove the Back Cabinet in the direction of arrow.
1-2: CRT PCB (Refer to Fig. 1-2)
CAUTION: BEFORE REMOVING THE ANODE CAP,
DISCHARGE ELECTRICITY BECAUSE IT
CONTAINS HIGH VOLTAGE.
BEFORE ATTEMPTING TO REMOVE OR
REPAIR ANY PCB, UNPLUG THE POWER
CORD FROM THE AC SOURCE.
1.
2.
3.
Remove the Anode Cap.
(Refer to REMOVAL OF ANODE CAP)
Disconnect the following connectors:
(CP801, CP802B, CP803 and CP852).
Remove the CRT PCB in the direction of arrow.
Front Cabinet
Fig. 1-1
Fig. 1-2
Front Cabinet
1
1
1
1
Back Cabinet
1
1
CP803
CP852
1-3: AV/POWER/DVD BLOCK (Refer to Fig. 1-3)
1.
2.
3.
Remove the 2 screws 1.
Disconnect the following connectors:
(CP303, CP404, CP6402 and CP5902).
Remove the AV/Power/DVD Block in the direction of arrow.
Fig. 1-3
Front Cabinet
CRT PCB
CP802B
CP801
1
AV/Power/DVD Block
1
CP303
CP404
CP6402
1
1
1-4: USB PCB (Refer to Fig. 1-4)
1.
2.
Remove the 4 screws 1.
Remove the USB PCB in the direction of arrow.
Fig. 1-4
Front Cabinet
1
CP5902
USB PCB
1
1
1