User’s Manual 7-1
HW Setup and Passwords
Chapter 7
HW Setup and Passwords
This chapter explains how to use TOSHIBA HW Setup program to
configure your computer and how to set passwords.
HW Setup
TOSHIBA HW Setup allows you to configure settings for General,
Password, Display, Boot Priority, Keyboard, USB, LAN.
Accessing HW Setup
Click on Start All Programs TOSHIBA Utilities and click
HWSetup.
HW Setup Window
The HW Setup window contains the following tabs: General, Password,
Display, Boot Priority, Keyboard, LAN, USB.
General
This window displays the BIOS version and contains two buttons:
If the supervisor password is set, access to the TOSHIBA HW Setup
program can be prevented when the user password is used to log on to
the computer.
OK Accepts your changes and closes the HW Setup
window.
Cancel Closes the window without accepting your
changes.
Apply Accepts all your changes without closing the HW
Setup window.
Default Return all HW Setup values to the factory
settings.
About Display the HW Setup version.
To Next Page
Loading...
