Toshiba MJ-1028 - Height Sensor (PS1) Adjustments; EEPROM (Q2) Adjustments; Saddle Stitch Controller PCB Adjustments; Hole Punch Board Adjustments

9
Height Sensor Adjustment
Alignment Position
Staple Position
Buffer Roller Winding Amount
Height Sensor (PS1)
Height Sensor Adjustment
EEPROM (Q2)
Buffer Roller Winding Amount
Saddle Stitch Controller PCB
Set the new DIPSW1 so that the settings will be the same as those on the old
DIPSW1.
Hole Punch Board
Refer to item 7.
END