–6–
Warning indications on the hot water module
• This is the part for transportation. Be sure to remove this part before operating the unit.
• To avoid water leak, wrap some sealing tape around the screw part.
• Do not operate VRF system before the commissioning of this product is fully completed. Failure to do so will
result in water freezing and bursting/failure of the plate heat exchanger.
Warning indication Description
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect all remote electric power supplies before servicing.
CAUTION
High temperature parts.
You might get burned when removing this panel.
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect all remote
electric power supplies
before servicing.
CAUTION
High temperature parts.
You might get burnt
when removing this panel.
2 Accessory parts
Part name Qty Shape Usage
Installation Manual 1 This manual
Hand over to customers
(For other languages that do not appear in this Installation Manual,
please refer to the enclosed CD-R.)
Owner’s Manual 1 —
Hand over to customers
(For other languages that do not appear in the Owner’s Manual,
please refer to the enclosed CD-R.)
CD-ROM 1 — Installation Manual, Owner’s Manual
Heat insulator
1 For heat insulation of Gas pipe connecting section
1 For heat insulation of Liquid pipe connecting section
11-EN 12-EN
To Next Page
Loading...
