214
9 Pipe fixing rubber
- detachment/
attachment
072 type
This model uses (split rubber rings and) stainless steel bands as a measure to improve reliability by
anchoring vibrating system pipes.
<Locations where stainless steel fixing bands are used: 5>
096 type
114 type
This model uses (split rubber rings and) stainless steel bands as a measure to improve reliability by
anchoring vibrating system pipes.
<Locations where stainless steel fixing bands are used: 11>
No. Part to be replaced Work procedure Remarks
Suction pipe <=> Distributor
Ø19.05 <=> Ø22.22
Oil header <=> Liquid pipe
Ø25.4 <=> Ø12.7
SV2 valve <=> Discharge pipe
Ø6.35 <=> Ø15.88
SV41 valve <=> Suction pipe
Ø8.0 <=> Ø19.05
SV42 valve <=> Suction pipe
Ø8.0 <=> Ø19.05
Suction pipe <=> Distributor
Ø22.2 <=> Ø22.2
SV3C valve <=> Discharge pipe
Ø6.35 <=> Ø15.9
Oil header <=> Liquid pipe
Ø25.4 <=> Ø15.9 (2 used)
Liquid pipe <=> Balance pipe
Ø15.9 <=> Ø9.52
Suction pipe <=> SV3F valve
Ø19.1 <=> Ø9.52
Liquid pipe <=> SV3 pipe
Ø15.9 <=> Ø9.52
SV41 valve <=> Suction pipe
Ø8.0 <=> Ø19.1
SV42 valve <=> Suction pipe
Ø8.0 <=> Ø19.1
SV43 valve <=> Suction pipe
Ø8.0 <=> Ø19.1
SV2 valve <=> Discharge pipe
Ø6.35 <=> Ø19.1
To Next Page
Loading...
