This microwave oven uses modern electronic control to adjust cooking parameters
to meet your needs better for cooking.
When the microwave oven is electrified,the oven will display "0:00", buzzer will ring once.
Then the unit enters waiting states.
2) Turn parameter knob to adjust the hour figures, the input time should be within 0--23.
3) Press " " to confirm, the minute figures will flash.
5) Press " " to finish clock setting. ":" will flash.
Note: 1) If the clock is not set, it would not function when powered.
2) During the process of clock setting, if you do not press "
to confirm in 1 minute, the oven will go back to the previous status automatically.
1) Turn function knob to " ", the hour figures flash.
4) Turn parameter knob to adjust the minute figures, the input time should be within 0--59.
There are two knobs on the panel. For better operations, the manual call the left knob
for function
Clock Setting
parameter knob. Call the right knob for knob.
Knob Instructions
"
1.
OPERATION INSTRUCTIONS
To Next Page
Loading...
