EasyManuals Logo

Toshiba MW2-MM20PF(SL) User Manual

Toshiba MW2-MM20PF(SL)
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #66 background imageLoading...
Page #66 background image
SETTING UP YOUR OVEN
COUNTERTOP INSTALLATION
Remove all packing material and accessories.
Examine the oven for any damage such as dents or broken door.
Do not install if oven is damaged.
Cabinet: Remove any protective film found on the microwave
oven cabinet surface. Do not remove the light brown
cover
that is attached to the oven cavity to protect the magnetron.
INSTALLATION
1. Select a level surface that provide enough open space for the
intake and/or outlet vents.
(1) The minimum installation height is 85cm.
(2) The rear surface of appliance shall be placed against a wall.
Leave a minimum clearance of 30cm above the oven, a
minimum clearance of 20cm is required between the oven
and any adjacent walls.
(3) Do not remove the legs from the bottom of the oven.
(4) Blocking the intake and/ or outlet openings can damage the
oven.
(5) Place the oven as far away from radios and TV as possible.
Operation of microwave oven may cause interference to
your radio or TV reception.
EN-12
waveguide
20cm
30cm
20cm
min85cm
0cm

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Toshiba MW2-MM20PF(SL) and is the answer not in the manual?

Toshiba MW2-MM20PF(SL) Specifications

General IconGeneral
BrandToshiba
ModelMW2-MM20PF(SL)
CategoryMicrowave Oven
LanguageEnglish

Related product manuals