24
TV operation
TV Operation (continued)
To set the unit to turn off after a preset amount of time,
press SLEEP on the remote control.
The clock will count down 10 minutes for each press of
SLEEP (120, 110, ...10, 0). After the sleep time is
programmed, the display will appear briefly every ten
minutes to remind you that the sleep timer is operating.
To confirm the sleep timer setting, press SLEEP and the
remaining time will be display for a few seconds. To
cancel the sleep timer, press SLEEP repeatedly until the
display turns to 0.
SLEEP
Sleep
Press MUTE to switch off the sound. The unit’s sound will
be silenced and “MUTE” will briefly appear on the screen.
The sound can be switched back on by pressing this
button again or one of VOLUME ▲ or ▼.
Mute
MUTE
Channel /
Press and release CHANNEL or .
The channel automatically stops at the next channel set
into memory. For proper operation, before selecting
channels, they should be set into the memory. See page
26 “Setting channels automatically”.
CH 012
CHANNEL
Channel return
This button allows you to go back to the last channel
selected by pressing CHANNEL RETURN. Press this but-
ton again to return to the last channel you were watching.
CH 012
CHANNEL
RETURN
SKIP
Note:
To listen through the headphone, insert a headphone (not
supplied) with a 1/8" mini plug into HEADPHONE jack on the
front. The sound from the TV speaker is muted.
CHANNEL /
MUTE
CHANNEL RETURN
SLEEP
SLEEP
120
5F10101C (E)p23-30 7:5:03, 18:5624
To Next Page
Loading...
