Toshiba MW20FN1 - Convenient Function; Repeat Playback; Using the Real Time Tape Counter

38
Playback (VCR)
ENTER
PLAY
COUNTER RESET
Convenient function
To cancel repeat mode:
Follow the above step 1, then press ENTER to select “OFF”
position. Press MENU to return to the TV
screen .
The repeat function is canceled automatically when the unit
is switched off.
Press MENU. Press
or to select “AUTO
REPEAT”.
1
Then press ENTER to select “ON” or “OFF”.
If “ON” is selected, the playback
will be repeated endlessly.
2
3
4
Repeat playback
The entire video tape will be played until its end. The tape
will automatically rewind to the beginning and the playback
will be repeated.
Using the real time tape counter
SETUP
MENU
ENTER
ENTER
SETUP
MENU
PLAY
Press DISPLAY.
1
Press COUNTER RESET to set the counter to
“00:00:00”.
2
Begin Playback or Recording to start the tape,
the counter will display the elapsed time.
3
When you wish to make the counter disappear,
press DISPLAY once again.
4
The On-Screen Real Time Tape Counter shows the tape
running time in Hours, Minutes and Seconds. You can
easily determine how long the tape has been running or
how much time is left on the tape.
8
:
40AM THU
00
:
00
:
00 SP
CH 012
TV/VCR
00
:
30
:
50 SP
8
:
40AM THU
TV/VCR
CH 012
DISPLAY
ANGLE
COUNTER
RESET
PLAY
DISPLAY
Press MENU until the menu screen is cleared.
If you press DISPLAY, “ ” will
appear on the screen
11
.
To start the playback, press PLAY.
The playback will be repeated
endlessly.
REC
REC
DISPLAY
MENU
M E N U
TIMER REC SET
TV SETUP
CH SETUP
AUTO REPEAT ON OFF
SYSTEM SETUP
〈
/ /ENTER/MENU
〉
M E N U
TIMER REC SET
TV SETUP
CH SETUP
AUTO REPEAT ON OFF
SYSTEM SETUP
〈
/ /ENTER/MENU
〉
5F10101C (E)p35-39 7:5:03, 18:5738