40
TV operation
!"!
# # $
#
!"!
# # $
#
Selecting the display format/
Selecting the Scan Velocity Modulation (SVM)
Display format feature converts a 480p input signal to 540p or 1080i.
The SVM feature enhances picture contrast and sharpness. This
feature has three modes: HIGH, LOW and OFF.
Selecting the display format
Press MENU in the TV/VCR mode, then press
or to select PICTURE menu.
1
Press or to select “540p” or “1080i”.
3
Notes:
• The DISPLAY FORMAT feature is available only for 480p
input. 1080i is always output when a signal other than 480p
is input.
• If you notice flickering in a 480p image, try setting the
DISPLAY FORMAT to 540p.
Press RETURN to make the menu screen
disappear.
4
Press MENU in the TV/VCR mode, then press
or to select PICTURE menu.
1
2
Press or to select “SVM”.
Selecting the Scan Velocity Modulation (SVM)
3
Press or to select the mode you prefer.
Note:
SVM is not required when viewing some high-quality video
material. If you are watching high-quality video material, you
may want to set SVM to OFF.
! ! "
!
MENU
/ / /
RETURN
Press or to select “DISPLAY FORMAT”.
2
PICTURE
CableClear ON
COLOR
TEMPERATURE COOL
DISPLAY FORMAT 1080i
SVM LOW
HIGH/LOW/OFF
RESET
: SELECT : ADJUST
RETURN : END
Press RETURN to make the menu screen
disappear.
4
5U30101B [E]p38-40 4/1/05, 3:26 PM40
To Next Page
Loading...
