®
You must set the date and time manually for timer recordings, ON/OFF timer and daylight saving time if the auto clock
3rocess did not set them correctly.
Example: Setting the clock to "8:30 AM", 31th. (SAT)
March, 2007.
Press MENU, then press _ or _ to selectoption.
Press A or T to select "CLOCK SET", then
press _.
Press -,I or _ to set the month, then press T.
Set the day, year and time as in step 3, thenpress ENTER.
After setting the clock, date and time startsfunctioning automatically.
II To make corrections anytime during the process
Press A or T repeatedly until the item you want to
change blinks, then set the item again.
Notes:
• After a power failure or disconnection of the power, the clock
settings will be lost. In this case, reset the present time.
• When you set the minute, you can change in 10-minutes
step by holding down _ or _.
w
¢)
®
I 5Y40101A indb 21
÷
1 16 AM
12'212006 11:i8 I
To Next Page
Loading...
