a disc
This section shows you the basics on how to play a disc.
CAUTION
Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.
Illustration of MW20H63
I iiilii I
3,5 6 51
®
Preparations:
• Insert the AC cord plug into a standard 120V 60Hz polarized AC outlet. If the AC cord plug is plugged in for the first
time, you need to set "Starting setup" [_.
When connecting to other equipment, turn power off.
Press POWER on the unit or on the remote
control to turn on the unit.
The Power indicator will light.
= Every time you press POWER, the unit starts
from TV mode.
= When using an amplifier, switch on the amplifier.
POWER
P,o_vsR
-,9,-
1
Press DVD to sNect DVD mode.The DVD startup screen will appear on the screen.
"Reading" display will change to "No Disc". (If DVD
disc has already loaded, playback will start
automatically.)
©
Press OPEN/CLOSE.
The disc tray opens.
OPEN/CLOSE
A
4
Place a disc on the disc tray.
__ With the playback
_ side down
• There are two different disc sizes. Place the disc in
the correct guide on the disc tray. If the disc is out of
the guide, it may damage the disc and cause the unit
to malfunction.
Do not place a disc which is unplayable onthe disc tray.
Press OPEN/CLOSE or PLAY.
OPEN/C_OSE_AY The disc tray closes automatically.
1 On the TV-screen, ,,A. changes to
OR "Reading" and then playback
commences.
• Menu screen will appear on the TV screen if the disc
has a menu feature.
• Press A/v or _/_ to select title, then press ENTER.
Title is selected and play commences.
6
Press STOP to end playback.
STOP
1
[] Resuming facility
• The unit records the stopped
point, depending on the disc.
"!u" appears on the screen. Press
PLAY to resume playback (from
the scene point).
• If you press STOP again ("[]"
appears on the screen.), the unit
will clear the stopped point.
m To start playback in the stop mode
Press PLAY.
Note:
if the unit does not operate properly:
Static electricity, etc., may affect the player's operation.
Disconnect the AC power cord once, then connect it again.
5Y40101A indb 51
÷
w
o
,<
N
12'212006 11:i8 1AM I
®
To Next Page
Loading...
