C4-2
Confirm that the AC cord is plugged out.
Using the Serial Communication Change JIG (JG205), connect the set to personal computer. (Refer to Fig. 1)
RE-WRITE FOR DIGITAL SOFT FIRMWARE
1.
2.
3.
Fig. 1
Using the Flash UP-Date Soft Disc (JG206) and USA SD DTV ROM DISC(JG176), please Re-write the DIGITAL SOFT
FIRMWARE.
The operating manual for Re-writing is included in Flash UP-Date Soft Disc (JG206).
NOTE: It is possible to write only with the personal computer of WINDOWS.
To Next Page
Loading...
