Toshiba NB100 - Display Mask; Removing the LCD Display Mask

4 Replacement Procedures 4.8 Display Mask
4.8 Display Mask
Removing the Display Mask
Remove the display mask according to the following procedures and Figure 4-17, 4-18.
1. Remove the following 2 seals on the display module in that order:
- Two black seals on the top
2. Remove the following 2 screws on the display module, in that order:
- Two M2.5x5 black flat head screws on the top
3. Release the following 21 latches on the display mask, in that order:
- Five bottom latches
- Four latches on each of the left and right sides
- Four top latches
- Four latches under top cover.
Seal
M2.5 X5 black flat-head screw
LCM module
Figure 4-17 Removing the display mask
4-30 TOSHIBA NB100 Maintenance Manual