Toshiba NB200 - LCD Bezel Assembly; Removing the LCD Bezel Assembly

Error! Style not defined. Error! Style not defined. 4 Replacement Procedures
4.16 LCD Bezel Assembly
Removing the LCD Bezel Assembly
Remove the LCD bezel assembly according to the following procedures.
1. Remove the two mask seals that cover the screws.
2. Remove two M2.5x5 screws as shown in Figure 4.33.
TOBSHIBA
M2.5x5*2
Figure 4.33 Removing screws from the LCD Bezel Assembly
NB200 Maintenance Manual 4-41