Appendix A Base Unit BUM7B
6F8C1497
130
A
A.6 Registration of G2 I/O with nV-Tool and Slot Information
Registration of G2 I/O to BUM7B with nV-Tool and slot information including I/O data are
described using configuration examples of the main base unit containing PUM12 and
the remote base unit containing GA922. Part of nV-Tool display differs between the main
and remote base units. Confirm the difference.
Examples of registering a configuration to nV-Tool:
[Main base unit]
BUM7B
[S0] PUM12
[S1] RO663
[S10] RO663
[Remote base unit]
BUM7B
[S0] GA922
[S1] RO663
[S11] RO663
Table A.1 I/O module addresses according to the usage
Model BUM7B
Usage
Slot No.
S0 S1 S2 S3 S4 S5 S6 S7 S8 S9 S10 S11
Main base unit × ⓪ ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ －
Remote base unit × ⓪ ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩
S: Slot number
Circled number: Module address
BUM7B + GA922
BUM7B + PUM12
PU
I/O
０
SP
①
SP
②
SP
④
SP
③
SP
⑤
SP
⑥
SP
⑦
I/O module address
SP
⑧
I/O
⑨
SP
⑩
(0) (1) (2) (3) (5)(4) (6) (7) (8) (9)
(10) (11)
Slot Nos. S0 to S11
G
I/O
０
SP
①
SP
②
SP
④
SP
③
SP
⑤
SP
⑥
SP
⑦
I/O module address
SP
⑧
I/O
⑩
SP
⑨
(0) (1) (2) (3) (5)(4) (6) (7) (8) (9)
(
11
) (
10
)
Slot Nos. S0 to S11
To Next Page
Loading...
