Toshiba nv Series - Page 153

Appendix A Base Unit BUM7B
6F8C1497
134
A
The registration and display of G2 I/O with the engineering tool and specification of the
G2 I/O mounting position in the instruction word are shown below. For the remote base
unit, also refer to “G2 I/O Adapter (GA922) Module Instruction Manual” (6F8C1516).
Table A.2 I/O registration and display with the engineering tool in the main base unit
Slot No. Remarks
BUM7B usage Main base unit
Slot number S0 PUM12
S1 - S10 I/O module
S11 - Not
registerable
I/O module address S1 - S10 ⓪‐ ⑨
G2 I/O registration in the product tree S1 - S10 (1) - (10)
System view (I/O module status) S1 - S10 (1) - (10)
Log details, auxiliary information, slot
No.
S1 - S10 (1) -(10)
Instruction word (MREAD/MWRITE)
Unit + slot specification
S1 - S8 Unit = 0
Slot = (1) to (8)
S9 - S10 Unit = 1
Slot = [⑧ - ⑨] - 8
(1) - (10): Slot number
⓪ - ⑨: I/O module address (I/O module address = Slot No. - 1)
Table A.3 I/O registration and display with the engineering tool in the remote base unit
Slot No. Remarks
BUM7B usage Remote base unit
Slot number S0 GA922
S1 - S11 I/O module
I/O module address S1 - S10 ⓪ - ⑩
G2 I/O registration in the product tree S1 - S10 (1) - (11)
System view (I/O module status) S1 - S10 ⓪ - ⑩
Log details, auxiliary information, slot
No.
S1 - S10 ⓪ - ⑩
Instruction word
(MREAD_N/MWRITE_N)
Unit + slot specification
S1 - S8 Unit = 1
Slot = ⓪‐ ⑦
S9 - S11 Unit = 2
Slot = [⑧ to ⑩] - 8
(1) - (11): Slot number
⓪ - ⑩: I/O module address (I/O module address = Slot No. - 1)