Toshiba nv Series - Overview of Migration Products; Controller Module

Unified Controller nv Series type1 light Controller Unit Operating Instructions
7
1.4 Overview of Migration Products
This section provides an overview of the products applicable to T series migration. Use
these products after reading related manuals and attached specifications.
1.4.1 Controller Module
Unified controller type1 light PUM11/PUM12 (V01.40 or later) are used for T series
migration systems.
Refer to “Unified controller nv series type1 light Controller Unit User’s Manual - Basic
Hardware -” (6F8C1497) for the appearance of PUM11/PUM12.
PUM11/PUM12 is inserted into a mountable slot of the base unit. PUM11/PUM12 cannot
be used independently or in unspecified combinations.
Table 1.2 Mounting slots on the main base unit for PUM11
Slot No.
Base model S0 S1 S2 S3 S4 S5 S6 S7 S8
BU668 ○ × × × × × × × ×
BU666 ○ × × × × × - - -
BU664 ○ × × × - - - - -
(○: Mountable, ×: Not mountable, --: Not provided)
Table 1.3 Mounting slots on the main base unit for PUM12 (1)
Slot No.
Base unit S0 S1 S2 S3 S4 S5 S6 S7 S8
BU648E ○ × × × × × × × ×
BU643D ○ × × × - - - - -
(○: Mountable, ×: Not mountable, -: Not provided)
Table 1.4 Mounting slots on the main base unit for PUM12 (2)
Base unit S0 S1 S2 S3 S4 S5 S6 S7 S8 S9 S10 S11
BUM7B ○ × × × × × × × × × × ×
(○: Mountable, ×: Not mountable)