Toshiba nv Series - Page 28

Unified Controller nv Series type1 light Controller Unit Operating Instructions
9
Table 1.6 Mounting slots on the expansion base unit
Slot
Base unit PIF PS S0 S1 S2 S3 S4 S5 S6 S7 S8
BU668 - - × IO IO IO IO IO IO IO IO
BU666 - - IO IO IO IO IO IO
BU664 - - IO IO IO IO
PIF: For mounting the expansion interface module (IF661)
PS: For mounting the power supply module (PS693, PS632, PS652)
S0 - S8: For mounting modules
I/O: For mounting the G2 I/O module
×: Not mountable. Be sure to install an empty module (SP600).
Table 1.7 Mounting slots on the remote station main base unit
Slot
Base unit PIF PS S0 S1 S2 S3 S4 S5 S6 S7 S8
BU668 - - GA922 IO IO IO IO IO IO IO IO
BU666 - - GA922 IO IO IO IO IO
BU664 - - GA922 IO IO IO
PIF: For mounting the expansion interface module (IF661)
PS: For mounting the power supply module (PS693, PS632, PS652)
S0 - S8: For mounting modules
GA922: For mounting the G2 I/O adapter module (GA922)
I/O: For mounting the G2 I/O module
◆Remark
Be sure to install an empty module (SP600) for the slot which does not contain a
module.
◆Remark
Be sure to install an empty module (SP600) or IF cover (SP601) for the slot which
does not contain a module.