Toshiba nv Series - Expanded Interface Module, Expanded Cable

Unified Controller nv Series type1 light Controller Unit Operating Instructions
13
1.4.4 Expansion Interface Module and Expansion Cable
The standard expansion interface module for unified controller type1 light is used for the
standard base unit of type 1 light for T series migration systems.
Base unit BUM7B for T series migration systems is not equipped with expansion
interface (IF661), and therefore cannot be expanded.
(1) Unified controller type1 light
■ Expansion interface module
Refer to “Unified controller nv series type1 light Controller Unit User’s Manual - Basic
Hardware -” (6F8C1497) for the appearance and specification of the standard interface
module for unified controller type 1 light.
Table 1.14 Expansion interface module for unified controller type1 light
Model Product code Name Remark
IF661 GIF661**S G2 I/O expansion interface Main/expansion unit
■ Expansion cables
Refer to “Unified controller nv series type1 light Controller Unit User’s Manual - Basic
Hardware -” (6F8C1497) for the appearance and specification of the standard expansion
cable for unified controller type 1 light.
Table 1.15 Standard expansion cable for unified controller type1 light
Model Product code Name Remark
CS6R3 GCS6R3*CS Expansion cable 0.3 m
CS6R5 GCS6R5*CS
Expansion cable
0.5 m
CS6R7 GCS6R5*CS
Expansion cable
0.7 m
CS6*1 GCS6*1*CS
Expansion cable
1.2 m
(2)T3/T3H シリーズ