Toshiba nv Series - TC-Net I;O Adapter Module

Chapter 1 Overview of T Series Migration
6F8C1497
14
1.4.5 TC-net I/O Adapter Module
The G2 I/O adapter module (GA922) is used for T series migration systems. It is
mounted in the specified slot of the relevant base unit. The G2 I/O can be used as a
remote station of PUM12 in the TC-net I/O adapter modules.
(1) G2 I/O adapter module (GA922)
Refer to “Unified controller nv series G2 I/O Adapter (GA922) Module Instruction Manual”
(6F8C1516) for the appearance and specification of G2 I/O adapter module.
A basic unit of remote station can be configured by mounting GA922 in slot S0 of the
base unit (BU668、BU666、BU664) for unified controller type 1 light.
A remote unit can be configured by mounting GA922 in slot S0 of the base unit (BUM7B)
for T series migration systems. Use GA922 having a serial number xx1331 or greater for
mounting on BUM7B.
Refer to “1.4.2 Base Units” for mounting G2 I/O adapter module GA922 on the base unit.
(2)G3 I/O アダプタモジュール(GA932)
※
1