Chapter 2 System Migration Procedures
6E8C5563
34
2
2.2 S2T/S2E
2.2.1 CPU Module
The CPU module of T series compatible controller S2T/S2E is converted to
PUM11/PUM12.
Table 2.11 S2T/S2E CPU module conversion
After conversion
Before conversion
nv controller type1 light
PUM11 PUM12 PUM14
Integrated
controller
model 2000
S2T
PU662T ○ ○ ×
PU672T ○ ○ ×
S2E PU612E ○ × ×
○: Convertible, ×: Not convertible
Table 2.12 Comparison of CPU module/controller module specifications
S2T S2E nv controller type1 light
Model PU662T PU672T PU612E PUM11 PUM12
Applicable I/O G2 I/O G2 I/O ←
Development tool TPDS TPDS Engineering tool
Station bus Yes No ← Yes
Program capacity 32k step 64k step 32k step 32k step 64k step
Programing language LD，SFC LD，SFC LD，SFC，FBD，ST
I/O register 512W 512W 3kW
Data register 8kW 8kW 8kW
Execution
speed
Contacts 0.09us 0.11us 0.08us 0.04us
Coils 0.18us 0.22us 0.16us 0.08us
Moving 0.54us 0.65us 0.08us 0.04us
Add 0.9us 1.08us 0.08us 0.04us
Transmission
port
Tool
Connection
RS232C RS232C USB
Computer
Link
RS485 RS485 RS485
Ethernet No No Yes
Others － － － TC-net I/O
◆Remark：
Not all specifications are listed in the above comparison table.
Confirm the specification in the relevant instruction manual.
To Next Page
Loading...
