Chapter 2 System Migration Procedures
6E8C5563
38
2
2.2.5 I/O Module
The I/O module used for conversion from S2T/S2E to unified controller type1 light is the
same model.
Table 2.17 S2T/S2E I/O module conversion
S2T/S2E nv controller type1 light
Remarks
T-PDS Module name Model Module type
X 1W
DI633 DI633 16-point DC24V input
DI643 DI643 16-point DC48V input
DI632D DI632D 8-point DC24V input
DI653 DI653 16-point DC100V input
IN653 IN653 16-point AC100V input
IN663 IN663 16-point AC200V input
X 2W DI634 DI634 32-point DC24V input
X 4W
DI635 DI635 64-point DC24V input
DI635H DI635H 64-point DC24V high-speed input
AD624L AD624L 4ch analog input (8bit) 1-5V/4-20mA
AD634L AD634L 4ch analog input (8bit) 0-10V
AD624 AD624 4ch analog input (12bit) 1-5V/4-20mA
AD674 AD674 4ch analog input (12bit) ±10V
RT614 RT614 4ch RTD input
X 8W
AD668 AD668 8ch analog input (16bit)
TC618 TC618 8ch thermocouple input (16bit)
AD628S AD628S 8ch independent analog input 0-5V/0-20mA
AD638S AD638S 8ch independent analog input ±10V
Y 1W
DO633 DO633 16-point DC5-24V transistor output
DO633P DO633P 16-point DC12-24V transistor output (PNP)
AC663 AC663 12-point traic output
RO662S RO662S 8-point relay independent output
RO663 RO663 16-point relay output
Y 2W
DO634 DO634 32-point DC5-24V transistor output
DA622L DA622L 2ch analog output (8bit) 1-5V/4-20mA
DA622 DA622 2ch analog output 1-5V/4-20mA
DA672 DA672 2ch analog output ±10V
Y 4W
DO635 DO635 64-point DC5-24V transistor output
DA664 DA664 2ch analog output (16bit)
DA624S DA624S 2ch independent analog output 4-20mA
X+Y 4W MC612 MC612 2 axes positioning 200kpps *1
X+Y 8W MC614 MC614 4 axes positioning 1.3Mpps *1
iX+Y 4W CD633 CD633
DC24V input 16-point module with ths status
changed detection function
iX+Y 2W
PI632 PI632 2ch pulse input 5/12/24Vdc, 100kpps (Max)
PI672 PI672 2ch pulse input RS232C, 100kpps (Max)
iX+Y 4W CF611 CF611 General-purpose interface 1ch RS232C
OPT CF612 CF612 General-purpose interface (2ch RS232C+RS485)
*1: MC612 and MC614 are no longer produced.
To Next Page
Loading...
