Toshiba nv Series - Page 78

T series Migration User’s Manual - Hardware -
59
2
Images of conversion to type1 light using dedicated base unit BUM7B are shown below.
Figure 2.7 Images of T3 series BUM7B based conversion to type1 light
● Important
• DI/DO, AD/DA and TM611 modules are supported in GA922. Consequently,
transmission modules (TL-S20, TL-F10, FL-net, etc.), registered in the T3 expansion
unit, are not converted.
BU315/BU31A BU356/BU35B
BUM7B BUM7B
BUM7B
BU315/BU31A
I/O I/O I/O I/OI/O
T3/T3H
PU: PU324/PU325/PU325H/PU326H
I/O: G3 I/O module
PU
type1 light (PUM12)
PU: PUM11/PUM12
I/O: G2 I/O module
I/O I/O I/O I/O I/O
PU
I/O I/O I/O I/O I/O
PU: PU324/PU325/PU325H/PU326H
IF: Interface module
I/O: G3 I/O module
PU
PU: PUM12
GA: GA922
I/O: G2 I/O module
I/O I/O I/O I/OI/O
PU
TC-net I/O loop
I/O I/O I/O I/OI/O
IFIF
I/O I/O I/O I/OI/O
G
A
T3/T3H
type1 light（PUM12）+GA922
Expansion cable