Toshiba nv Series - Page 85

Chapter 2 System Migration Procedures
6E8C5563
66
2
・T3/T3H+BU31A (mounted I/O is 9 or 10)
PS I/O
(0)
I/O
(1)
I/O
(2)
I/O
(4)
I/O
(3)
I/O
(5)
I/O
(6)
I/O
(7)
BU31A
IF PS PU
(0)
I/O
(1)
I/O
(2)
I/O
(3)
I/O
(5)
I/O
(4)
I/O
(6)
I/O
(7)
I/O
(8)
BU668/BU648E
T3/T3H
type1 light（PUM11）
(0)～(9)：I/O Slot No.
(0)～(8)：Slot No. S0～S8
IF: Expansion interface module（not mount）
PS: Power module
PU: PU324/PU325/PU325H/PU326H
I/O: G3 I/O module（Up to 10）
SP: Space slot
IF: Expansion interface module
PS: Power module
PU: PUM11
I/O: G2 I/O module（Up to 8）
SP: Space slot
※: Also applicable to BU666/BU668
I/O
(8)
I/O
(9)
IF PS PU
(0)
I/O
(5)
I/O
(6)
I/O
(7)
I/O
(8)
BU648E
type1 light（PUM12）
(0)～(8)：Slot No. S0～S8
IF: Expansion interface module
PS: Power module
PU: PUM12
A
LL: Station bus module
or G2 I/O module
I/O: G2 I/O module（Up to 8）
SP: Space slot
※: Also applicable to BU666/BU668
PU IF
ALL
(1)
ALL
(2)
ALL
(3)
ALL
(4)
IF PS I/O
(0)
I/O
(1)
SP
(2)
SP
(3)
BU664
※
(0)～(3)：Slot No. S0～S3
IF PS I/O
(0)
I/O
(1)
SP
(2)
SP
(3)
(0)～(3)：Slot No. S0～S3
BU664
※
Delete configuration
Add configuration
Add configuration
◆Remark:
The T3/T3H system which contains more than eight G3 I/O modules on one base
unit cannot be converted to a system configured with the type1 light standard base
unit using the T-PDS conversion tool.
After converting G3 I/O to a system containing 8 or less modules, convert it to a
type1 light standard base unit system. Then add G2 I/O, equivalent to the deleted
G3 I/O, to another base unit.