Toshiba nv Series - Limitations

Unified Controller nv series type1 light PROFIBUS-DP Module PF611A / PF612A User’s Manual
43
A.4 Limitations
The combination conditions for the PF611A / PF612A module are as follows.
Table A-4 Limitations
Item
Limitations
Engineering tool
Engineering tool V4.11.0 or later (type1 light)
Engineering tool V2.8.0 or later (S2PU82)
HMS Anybus NetTool for PROFIBUS
version 1.09.0004 or later
GSD file
TSB1177.GSD (PF611A)
TSB1178.GSD (PF612A)
 The GSD files (TSB1177.GSD : PF611A / TSB1178.GSD : PF612A) are attached to
Engineering tool Version 4.14.16 or later.
It will be installed in the folder where you installed the Engineering tool.
You can also download GSD files from the Engineering Tool 4 (nV-Tool 4) update page on the
Unified Controller nv series / Integrated Controller V series product homepage.
 The PF611A / PF612A will not operate with the GSD file for PF611 / PF612. Please be sure to
use the GSD file for PF611A / PF612A. (TSB1177.GSD (PF611A) / TSB1178.GSD (PF612A))
Please be careful especially when the module is replaced from PF611/PF612 to PF611A /
PF612A.
 When the GSD file for PF612A (TSB1178.GSD) is used with Sycon, the following error message
is displayed, indicating that the vendor name length exceeds 32 characters. There is no problem
in the operation and it can be used normally.
- Sycon is the Profibus setting tool for PF611 / PF612.
Figure A-2 Error message when using PF612A with Sycon