Toshiba nv Series - Default Chapter; Table of Contents

6F8C1370
iv
Chapter 1
Overview
...1
1.1. Configuration of the module front panel ············ 3
1.2. PI918 function setting parameters ························ 4
1.2.1. Module parameter (common function setting) ·········· 4
1.2.2. Point parameter (function setting by channel) ·········· 4
Chapter 2
Interface
information of
the PI918
... 5
2.1. PI918 message reception format ··························· 6
2.1.1. Module parameter setting (common function setting) 7
2.1.2. Point parameter setting (function setting by channel) 8
2.2. PI918 scan reception format ································ 9
2.3. PI918 scan transmission format ··························· 9
Chapter 3
Counter function
of the PI918
... 11
3.1. Operation of the universal counter ······················ 12
3.1.1. Application as a programmable interrupt occurrence
timer ···························································· 13
3.1.2. Application as an auto reset universal counter ······· 15
3.1.3. Application as a gate on timer with alarm ············· 16
3.1.4. Application as a universal counter with alarm ········ 17
3.2. Operation of the speed counter ·························· 18
3.2.1. Application as a self diagnosis counter ················ 19
3.2.2. Application as a speed counter with alarm ············ 20
3.3. Operation of the slave counter ··························· 21
3.3.1. Application as a slave cycle counter ···················· 22
3.3.2. Application as a slave counter with alarm ············· 23
Appendix A
PI918 hardware
specifications
...25